OFFER OF MANUAL AND PNEUMATIC PUNCHING MACHINES AND SHEARS
MANUAL AND PNEUMATIC PUNCHIING MACHINES
With a welded "C" shaped stand
The punching machines are intended to make holes of various shapes in components made of steel sheets, bands, rods or profiles. They can be used for all standard metallic materials such as steel, non-ferrous metals or even non-metallic materials. Punching holes for installing instruments and push buttons in control panels can be mentioned as an example.
SURVEY OF BASIC TECHNICAL PARAMETERS:
| Technical
parameters / type |
NDJ 45/2 |
NDV 45/2/500 |
| Version | Manual |
Pneumatic |
| Nominal forming force | 100 kN |
100 kN |
| Reach | 300 mm |
500 mm |
| Max. size of punched hole | 45 mm |
45 mm |
| Max. thickness of punched sheet | 4 mm |
4 mm |
| Ram stroke | 13 mm |
8 mm |
| Operating air pressure | - |
0,5 MPa |
| Weight | 130 kg |
440 kg |
Examples of punching possibilities:
- a hole with a 45 mm diameter in 2 mm thick material (strength of up to 450 MPa)
- a hole with a 22 mm diameter in 4 mm thick material (strength of up to 450 MPa)
manual
punching machine NDJ |
pneumatic
punching machine NDV |
MANUAL AND PNEUMATIC RECTANGULAR SHEARS
The shears are mainly intended to cut rectangular corners and recesses
in pieces of steel sheets . The shears can be used also for trimming, notching
or dividing flat steel pieces. Blanking corners before bending when producing
box-shaped components can be mentioned as a standard shearing operation.
SURVEY OF BASIC TECHNICAL PARAMETERS:
|
Technical parameters / type |
NLR 100/3 |
NLV 100/3 |
| Version | Manual |
Pneumatic |
| Nominal forming force | 100 kN |
70 kN |
| Ram stroke | 15 mm |
13 mm |
| Max. thickness of processed sheet | 3 mm |
3 mm |
| Blade dimensions | 102 x 102 mm |
102 x 102 mm |
| Operating air pressure | - |
0,5 MPa |
| Weight | 76 kg |
120 kg |
manual
shears NLR |
pneumatic
shears NLV |